Hyper Tough AQ20019G - 1/4 Sheet - 17 Grits - No-Slip - 5 Sandpaper Bulk Bundles

Description

Hyper Tough AQ20019
-
1/4 Sheet
(4.5x5")
-
PrePunched - 5 Sheet
Bulk Sandpaper Bundles Available in 17 Different Grits
Select the grits you need to create the perfect sanding sheet combination!
Available in 40, 60, 80, 100, 120,150,180, 220, 240, 320, 400, 600, 800, 1000, 1200, 1500, 2000 Grits
Our Sanding Sheets Offer Unmatched Sanding Performance and Grit Selection
Pre-Cut to a 1/4 Sheet (4.5x5") size for a perfect fit
every time
Pre-Punched to provide the optimal hole size and alignment for maximum through pad dust collection
Made with Aluminum Oxide for longer lasting sanding performance
Features a 'Stay Put' No-Slip design that provides enhanced gripping for reduced sandpaper slippage on Hook-and-Loop compatible sanders.  This is a true
Clamp It And Forget It
solution
Features 'Place and Clamp' mounting resulting in even placement under each retention clamp the first time.  Simply place the sanding sheet on the bottom of the sander, aligning the dust collection holes with the pad holes, and clamp
Come in the widest variety of grits available in the industry to insure you have the right sanding sheets for every project
To pick more than one grit bundle simply close the 'Item Added to Cart' window, select your next desired grit and quantity and add that to your cart.  Continue adding desired grits and quantities to your cart until finished and then click the Checkout button
Note:  Bulk Sandpaper Bundles arrive in bulk packaging without a John's Workshop header card attached
*
Hyper Tough AQ20019G
Sander shown on any digital images is for reference purposes only and is not included with the sale of the sandpaper bundle
Shipping
Domestic Shipments
: Domestic Shipping is Free!
International Shipments
: International
First Class, International Priority Mail and eBay's Global Shipping will be offered once one clicks on the Checkout button.  At that point one is able to select the preferred/most cost effective shipping method
Grit
Coarseness
Guide
Coarse - 40 Grit - Good for fast removal of material
Medium - 60 to 80 Grit - Good for sanding bare surfaces in preparation for finishing and for removal of previous finishes
Fine - 100 to 120 Grit - Good for additional preparation of surfaces before applying finishes
Very Fine - 150 to 220 Grit - Good for final preparation of surfaces before applying finishes
Very Fine Finish Sanding - 240 to 320 Grit - Good for sanding finishes between coats
Extra Fine - 400 to 600 Grit - Good for initial polishing of finishes
Super Fine - 800 to 1200 Grit - Good for final polishing of finishes
Ultra Fine - 1500 to 2000 Grit - Good for final polishing of thick finishes